KKYG Temperature Controller Thermostat 300W-1200W Heater Heating Aquarium Tank, with Double Induction Probe, Safe and Efficient

When winter comes, many fishes and turtles need a warm environment to spend the winter safely. In order to give your cute fish a warm and safe living environment, we design this high security heater.

ERROR CODE:
ER-Automatically turn off the power when leaving the water
EE-normal temperature alarm
H1-temperature sensor 1 short circuit fault
H2-temperature sensor 2 short circuit fault
E1-temperature sensor 1 open circuit failure
E2-temperature sensor 2 open circuit failure
E3- Relay bonding failure
E4 – overvoltage fault

Notices
1, Before powering, make sure the heater is completely submerged in the water.
2, Before removing the heater out from the water, make sure the heater is unplugged to avoid dry heating.
3, Please NOT put the aquarium heater into the sand as this will cause INACCURATE heating.

Size:
300W-23CM,400W-23CM,500W-26CM,600W-26CM,800W-30CM,1000W-30CM,1200W-30CM
Temperature control range: 20 ° C – 34 ° C

Package contains
·1 x heater with
2 x suction cup

Precautions:
Delivery Time 15-25 days.Please contact us if you cannot receive the order after 30 days.
If you have any questions, you can get in touch with us by email, we will give you a satisfactory answer within 24 hours;

We have a variety of styles of Aquarium Heater. If you have time, welcome to our shop to buy, we will do our best to serve you.
Date First Available ‏ : ‎ November 11, 2019
Manufacturer ‏ : ‎ Lsak Gysa
ASIN ‏ : ‎ B0819VQHG3

MATERIAL: Acid and alkali resistant quartz glass corrosion. It can be used in fresh water/sea water and has a wider range of applications.
FAULT SELF-TEST: digitally displays the fault code and flashes the prompt. After the system fault is cleared, the E3 relay glue fault is displayed. Even if the fault is removed, it cannot be recovered. The button must be pressed for more than 2 seconds to cancel the fault.
DOUBLE NEEDLE PROBE: When the water level is lower than the bottom of the probe, the water shortage protection function is turned on to prevent dry burning. The probe is far away from the heat source and the temperature measurement is more precise.
FILLER: The heating rod has a built-in filling, and the silicon carbide heats up more quickly and with high efficiency.